Individual AWS Accupath Wedges – 70°

Individual AWS Accupath Wedges – 70°

Brand: TheSonic India
Product Name: Individual AWS Accupath Wedges – 70°
Product Type: AWS Standard Accupath UT Wedge
Inspection Method: Conventional Ultrasonic Testing / Angle Beam UT
Material: Rexolite
Application: 70° angle beam ultrasonic weld inspection
Email: i@thesonic.com

Product Overview

TheSonic India AWS Standard Accupath Wedges – 70° are designed for conventional ultrasonic weld inspection where a 70° angle beam configuration is required. The wedge acts as the acoustic interface between the ultrasonic probe and the inspected component, helping guide the ultrasonic beam into the material at the required inspection angle.

The 70° Accupath wedge is commonly selected for weld inspection applications where higher-angle beam entry is required based on weld geometry, material thickness, inspection coverage, and approved UT procedure. The Accupath wedge design supports accurate sound path control, stable coupling behavior, and repeatable probe movement during manual ultrasonic weld scanning.

Manufactured from high-quality Rexolite material, the wedge supports efficient ultrasonic sound transmission, dimensional stability, and reliable acoustic performance. The wedge is designed to support clean signal response, controlled beam entry, and reduced unwanted wedge noise during angle beam UT inspection.

Key Features

·       Designed for AWS-style conventional UT weld inspection

·       70° angle beam wedge configuration

·       Manufactured from high-quality Rexolite material

·       Accupath wedge design for controlled sound path and stable scanning

·       Supports stable ultrasonic coupling and repeatable probe positioning

·       Helps maintain accurate beam direction during weld inspection

·       Suitable for steel weld inspection applications as per approved procedure

·       Useful for fabrication, site inspection, maintenance, and quality control work

·       Compatible with suitable conventional UT probes, subject to dimensional confirmation

·       Available as an individual wedge or as part of the 45°, 60°, and 70° Accupath wedge set

Detailed Product Description

The Individual AWS Accupath Wedge – 70° from TheSonic India is developed for conventional ultrasonic angle beam weld inspection where a 70° beam configuration is required. In UT weld inspection, wedge angle selection plays an important role in weld coverage, flaw response, sound path control, and inspection reliability.

This 70° Accupath wedge is suitable for inspection tasks where higher-angle beam coverage is needed to examine weld volume, fusion zones, sidewall areas, and relevant weld regions as per the inspection procedure. The wedge supports stable manual scanning and helps maintain consistent acoustic contact between the probe, wedge, couplant, and test surface.

The Rexolite wedge body supports efficient ultrasonic energy transfer from the probe into the inspected component. The controlled wedge geometry helps improve beam consistency, signal clarity, and repeatable inspection response during industrial UT weld scanning.

70° Accupath Wedge Application

The 70° AWS Accupath Wedge is selected when the inspection procedure requires a 70° angle beam configuration. Final suitability should be confirmed based on material type, weld thickness, probe frequency, probe size, inspection code, and approved ultrasonic testing procedure.

Typical Applications

·       Conventional angle beam UT weld inspection

·       AWS-style structural weld inspection

·       Higher-angle ultrasonic weld scanning

·       Fabrication weld quality control

·       Structural steel weld inspection

·       Plate weld inspection

·       Pressure component weld inspection where applicable

·       Manual ultrasonic weld scanning

·       Site inspection and maintenance inspection

·       NDT service and quality control applications

Technical Information

Compatibility and Customization

TheSonic India AWS Standard Accupath Wedges can be supplied for suitable conventional UT probes based on probe diameter, probe housing, mounting requirement, cable exit direction, and inspection application. Customization may include wedge angle, probe fitting, wedge footprint, identification marking, and project-specific configuration.

Contact Note

For technical details, probe compatibility confirmation, product customization, commercial quotation, or bulk supply requirements, please contact TheSonic India.

Email: i@thesonic.com
Brand: TheSonic India