PAUT A32 Series CID Wedges for A32 Probe Series

PAUT A32 Series CID Wedges for A32 Probe Series

Brand: TheSonic India
Product Name: PAUT A32 Series CID Wedges
Probe Series Compatibility: A32 Probe Series
Product Type: CID PAUT Wedge
CID Meaning: Circumferential Inner Diameter Wedge
Inspection Method: PAUT / Phased Array Ultrasonic Testing
Material: Rexolite
Application: Circumferential weld inspection on inner-diameter curved surfaces
Email: i@thesonic.com

Product Overview

TheSonic India PAUT A32 Series CID Wedges are specially developed for A32 Probe Series phased array ultrasonic testing applications where the probe and wedge must operate from the inner diameter of a curved component. The CID wedge configuration is suitable for circumferential inner-diameter inspection, where the wedge contact surface needs to match the internal curvature of the component and support inspection around the circumference.

In PAUT weld inspection, internal curved surface applications require careful wedge design because the contact area is concave and the inspection movement differs from flat or outer-diameter scanning. The CID wedge is designed to provide stable seating on the inside curved surface while helping maintain controlled ultrasonic beam entry, reliable probe orientation, and repeatable scan performance.

Manufactured from high-quality Rexolite material, the A32 Series CID Wedge supports efficient ultrasonic transmission and dependable acoustic performance for advanced NDT applications. The wedge is supported with high-quality, high-standard damping material designed with a zero-tolerance approach toward unwanted ultrasonic sound acceptance. This damping support helps absorb, control, and divert unwanted ultrasonic energy, reducing unnecessary internal reflections, wedge noise, and signal disturbance during inspection.

Key Features

·       Designed for A32 Probe Series PAUT weld inspection applications

·       CID configuration for circumferential scanning on inner-diameter curved surfaces

·       Manufactured from high-quality Rexolite material

·       Suitable for internal PAUT inspection of pipes, vessels, shells, and cylindrical components

·       Concave ID-matching contact profile supports better seating on internal curved surfaces

·       Helps maintain stable probe orientation during circumferential ID weld inspection

·       Supports controlled ultrasonic beam entry and reliable sound transmission

·       High-quality damping material to absorb, control, and divert unwanted ultrasonic energy

·       Helps reduce unwanted wedge reflections, internal noise, and signal disturbance

·       Suitable for manual PAUT scanning and scanner-assisted inspection where internal access permits

·       Can be supplied for different OEM and international PAUT probe models, subject to dimensional confirmation

·       Suitable for fabrication, in-service inspection, shutdown maintenance, and industrial quality control applications

Detailed Product Description

The PAUT A32 Series CID Wedge from TheSonic India is designed for phased array ultrasonic weld inspection from the internal side of cylindrical components. This wedge is selected when the inspection contact surface is located on the inner diameter and the scan direction or wedge orientation follows the circumferential path of the component.

Unlike Flat, AOD, COD, or AID wedge configurations, the CID wedge is specifically intended for inner-diameter circumferential applications. Its contact surface is prepared to suit the internal curvature of the component, helping the wedge sit correctly on the concave ID surface. This improves coupling stability, reduces unstable probe movement, and supports more consistent ultrasonic response during internal circumferential weld inspection.

The Rexolite wedge body supports effective transfer of ultrasonic energy from the phased array probe into the inspected material. The addition of high-standard damping support helps manage unwanted sound paths within the wedge body. This contributes to cleaner inspection signals, improved data consistency, and better reliability during PAUT examination of internal curved surfaces.

The A32 Series CID Wedge is suitable for NDT service companies, pressure vessel manufacturers, pipe spool fabricators, refinery maintenance teams, power plant inspection teams, EPC contractors, inspection laboratories, and quality control departments requiring dependable PAUT accessories for internal circumferential weld inspection.

CID Wedge Application

The CID Wedge configuration is recommended for inner-diameter curved surfaces where the inspection requirement is circumferential. It is mainly used when the phased array probe and wedge must be positioned on the internal surface of a pipe, vessel, shell, or cylindrical component and the inspection movement follows the internal circumference.

CID is different from AID because CID is used for circumferential ID applications, while AID is used for axial ID applications. CID is selected when the inspection contact surface is on the inner diameter and the wedge needs to support circumferential orientation around the component.

Typical Applications

·       PAUT weld inspection on circumferential ID curved surfaces

·       Inner-diameter circumferential inspection of pipes and vessels

·       Internal surface inspection of cylindrical shells

·       Pressure vessel internal weld inspection

·       Pipe spool and process piping internal weld inspection where access permits

·       Shell, nozzle, and cylindrical component inspection where CID geometry is required

·       Refinery and petrochemical plant internal weld inspection applications

·       Power plant and boiler component inspection where internal access is available

·       Shutdown maintenance inspection of accessible ID curved surfaces

·       Manual phased array ultrasonic testing from internal curved surfaces

·       Scanner-assisted PAUT inspection with suitable internal access and fixture arrangement

·       Industrial quality control and in-service inspection applications

Suitable Inspection Areas

The PAUT A32 Series CID Wedge is suitable for components where the inspection contact surface is located on the inner diameter and circumferential ID curvature matching is required. It is commonly used for accessible internal surfaces of pipes, vessels, shells, cylindrical bodies, nozzles, and similar curved components.

For flat surfaces, the Flat Wedge configuration is recommended. For axial OD inspection, AOD may be selected. For circumferential OD inspection, COD may be selected. For axial ID inspection, AID may be selected based on the inspection direction and component geometry.

Technical Information

Universal Probe Compatibility

TheSonic India PAUT A32 Series CID Wedges are designed for A32 Probe Series applications and can also be supplied to suit different phased array probe models from reputed worldwide OEM brands. Compatibility can be confirmed based on probe dimensions, probe housing design, mounting arrangement, cable exit direction, active aperture, element configuration, ID curvature requirement, and inspection application.

These wedges can be manufactured or customized for different PAUT inspection systems and probe brands, subject to technical review and dimensional confirmation.

Probe and Component Details Required for Compatibility Confirmation

To select or manufacture the correct A32 Series CID Wedge, the following details may be required:

·       Probe brand and model number

·       Probe series and probe drawing

·       Number of elements

·       Element pitch

·       Active aperture size

·       Probe housing dimensions

·       Mounting hole position

·       Cable exit direction

·       Required refracted angle

·       Inspection material

·       Component inside diameter

·       Required curvature type: CID

·       Internal access condition

·       Manual or scanner-based inspection requirement

Customization Options

TheSonic India can support standard and customized PAUT A32 Series CID Wedges based on customer inspection requirements. Customization may include:

·       Inner-diameter circumferential curvature matching based on pipe or vessel ID

·       Probe fitting arrangement

·       Wedge angle selection

·       Wedge footprint and height

·       Mounting hole arrangement

·       Scanner interface requirement

·       Irrigation or couplant feed option

·       Wear-resistant contact surface option

·       Engraved part number or identification marking

·       Application-specific wedge design

·       OEM probe compatibility modification

Recommended Industries

·       Oil & Gas

·       Petrochemical Plants

·       Refineries

·       Power Plants

·       Boiler and Pressure Vessel Fabrication

·       Pipeline and Process Piping Fabrication

·       Heavy Engineering

·       Shipbuilding and Marine Fabrication

·       Plant Maintenance and Shutdown Inspection

·       NDT Service Companies

·       Inspection and Quality Control Laboratories

Why Choose TheSonic India PAUT A32 Series CID Wedges?

TheSonic India PAUT A32 Series CID Wedges are designed for reliable phased array ultrasonic weld inspection on circumferential inner-diameter curved surfaces. The product combines Rexolite wedge material, internal curvature matching, stable ID surface contact, controlled ultrasonic beam positioning, and high-standard damping support to deliver dependable inspection performance.

These wedges are suitable for customers looking for accurate, durable, and application-ready PAUT weld inspection accessories with A32 Probe Series compatibility, OEM probe adaptability, and customization support.

Contact Note

For technical details, probe compatibility confirmation, ID curvature selection, product customization, commercial quotation, or bulk supply requirements, please contact TheSonic India.

Email: i@thesonic.com
Brand: TheSonic India